Model 180 EPE foam extrusion line
Model 180 EPE foam extrusion line takes an area of 38mx6mx3.5m. It can make 3mm-18mm thick sheets. If you make 2m-wide sheets, you can get 2mm thickness, too. Its output is about 300-500kg/h. (capacity differs according to different sheet width and thickness). Generally speaking, if you make thin and narrow sheets, its output must be lower than if you make thick and wide sheets.
Model 180 was the main model for making baby crawling mats in Chinese market during earlier years. Most mat sizes are 2mx1.8m, and thickness are mainly 5mm, 10mm, 15mm, 20mm. Model 180 performs well for making 2m-wide, 5m-thick sheets, the density is low, and surface quality is good.
In recent years, with the development of southeastern-Asian market and African market, many Chinese investors choose to make such mats in Southeastern-Asian countries and African countries. They bought Model 180 EPE foam extrusion line and corresponding extrusion lamination machine, cutting machine, bonding machine, recycling machine for making baby crawling mats in other countries.
Later, with the increasing demands in China, there is more fierce competition. To save production cost and increase profit margin, model 180 is taken place by model 200 or 220. At present, for making baby crawling mats in China, 200 is the main model. However, if the competition is not so fierce, model 180 EPE foam extrusion line can still work well.
