Model 120 EPE foam sheet making machine

The sheet thickness range made by Model 120 EPE foam sheet making machine is 0.5-7mm. (for width 900-4000mm). As the machine output is fixed, (for model 105, it is about 180kg/h), the wider the sheet is, the thinner the thickness is. 

Total installed power of Model 120 is 115kW, the real electricity consumption is about 55kW. (Note: For the EPE extruding line, not all the electrical parts work together. During normal process, the motor is adjusted by inverter, it is not working full loaded. And the water cooling part doesn’t need heating, that is why the real electricity consumption is just half of the total installed power).

The screw length of Model 120 EPE foam sheet making machine is 6600mm. Adding the die head, gearbox, and motor, etc, the main extruder length is about 8m. The total production line (including the auxiliary parts such as sizing, slitting, flattening, hauling, winding), the workshop length had better be about 25m length. 

In Chinese market, this model is a small model, it is mainly to make EPE sheet roll, foam pipe, rod, profile, etc. 

The EPE sheets are used as wooden floor moisture-proof layer, floor heating reflective layer, roof heat-insulating layer, etc. Profiles can be used for the protection for doors, windows and furniture, etc. In some places where the competition is not fierce, manufacturers bond the sheets made by this model to get more thickness. 

We don’t suggest that manufacturers make it in this way because to make 6-7mm thickness sheets, big model machine can make better quality and lower density. Using model 120 to make thin sheets then bond them will have more loss so the profit is lower.