Epe foam mattress is favored by customers in developing countries because of its simple production process, low production cost and good thermal insulation and waterproof effect.

The production of epe foam mattress requires a large extruder to produce EPE sheet in roll because the thickness of mattress is normally more than 10mm thick while only big extruders can make this thickness at the low cost.  If customers need mats with thickness of more than 10mm, then you need a bonding machine which can bond two layers of EPE sheets together to get more thickness. After bonding, we have to use a cutting machine to cut the sheets into the suitable size. The scraps and waste after cutting can be recycled by recycling machine so that it can be re-used. In this way, we can save material and lower the production cost. 

To produce EPE foaming mattresses, we need big-type of EPE sheet extruding line  (such as model 180, 200, 220 or 250),  EPE bonding machine, EPE cutting machine and EPE recycling machine. 

Big type of EPE extruding line can make low-density EPE sheets which has small corrugation. Some of our customers who have good experience can make flat EPE sheets with low density.  For the same specification of sheets, if you use small-type of extruders, the density will be higher so the production cost is higher.

Because EPE foam sheet has very good performances of good thermal insulation, moisture-proof, water proof and anti-collision, besides, it is low cost, people in many developing countries use it to make mattress.

To make EPE foam mattress, we need at least EPE sheet extruder, EPE bonding machine, EPE cutting machine and EPE recycling machine.