EPE Foam Sheet Extrusion Machine Factory, Manufacturer & Supplier & Exporter- China RunJie Machinery

Precautions For the Protection & Maintenance of EPE Sheet Extrusion Line

The workshop temperature of the EPE extruding line needs to be at least 15 degrees Celsius, which is not reachable in winter in many places of the world.

Cost Analysis of Fruit Net

Foam net covers can be used for packaging of fruits, vegetables, flower buds and bottles. Our company has many years of practical experience and professional engineers and technicians, we developed many different sizes and specifications of nets according to market demand.

Precautions for fire prevention of epe products（polyethylene foam）

In terms of fire prevention and ventilation of epe products（polyethylene foam）, we have to do the detailed things as the following:

1. In the process of epe production（polyethylene foam）, if the ventilation of the workshop and warehouse is not good, it is easy to cause the concentration of butane gas to increase. When the concentration of butane gas reaches a certain level, it will be prone to fire when it encounters open flames or static sparks. To reduce the hazards caused by static sparks, turn on the humidifier or ion blower in the warehouse to maintain the humidity in the air.

Precautions for the use of EPE recyling machine(epe granulator)

EPE recyling machine(epe granulator) is an equipment for processing waste EPE foam sheet into plastic granules.The processed plastic particles can be used for EPE foam sheet production.

EPE foam sheet technological introduction

EPE foam sheet machine after adding the low density high pressure polyethylene and the talcum powder into extruder, through mixing、plasticizing、melting and homogenizing in screw barrel，injecting the butane and monostearin through the pressure metering pump.

Then, all materials get full contact 、mixing、homogenizing with each other under the condition of appropriate temperature，formation the foam, extruded by machine head through the filter screen net, through the sizing devise , cooling, cutting, flattening and the traction ,static elimination, second flattening, rolling by the rolling machine finally to get the ready product.

What is the principle of automatic correction device for PE extrusion laminating machine ?

What is the principle of automatic correction device for PE extrusion laminating machine? Which sensors (ultrasonic, photoelectric, pneumatic, etc.) are commonly used?

What is the difference between these sensors?

The automatic correction device is a system that automatically detects and controls the lateral position of the tape. It is through the sensor to detect the edge or edge of the tape (substrate), the use of the control system to calculate the lateral position of the fluctuations or errors, and issued an error correction instructions, by the implementing agencies to correct the horizontal position of the tape.

PE extrusion laminating machine Improve Production Efficiency And Reduce Production Costs

Generally speaking, the PE extrusion laminating machine refers to a kind of compound equipment in home textile, garment, furniture, automobile interior and other related industries. It is mainly used for all kinds of fabrics, leather, film, paper and sponge. Process. It is divided into plastic composite and non-adhesive compound, there are plastic composite is divided into water glue, PU oil glue, hot melt adhesive, etc., non-adhesive composite process for direct bonding between the material or flame burning composite. At present, the complex national standard has been implemented.